Mar, 30 2022

MIL-DTL-83528 Conductive Shielding Elastomers and QPL 83528



MIL-DTL-83528 Conductive Shielding Elastomers and QPL 83528

Specialty Silicone Products (SSP) makes conductive shielding elastomers, including five QPL listed products that meet MIL-DTL-83528 requirements. For engineers who need EMI/RFI gaskets for military applications, it’s important to know what MIL-DTL-83528 is and how it’s related to the QPL. It’s also worth learning about some other conductive shielding elastomers that are used in military projects.  

What is MIL-DTL-83528?

MIL-DTL-83528 is a detail specification from the U.S. Department of Defense that establishes the general requirements for electrically-conductive elastomeric shielding gaskets. In additional to environmental resistance, these military gaskets provide shielding against electromagnetic interference (EMI) and radio frequency interference (RFI), disturbances that can affect electrical and electronic devices and equipment.    

Within the MIL-DTL-83528 specification, lettered sections describe the requirements for specific material types. These requirements include the base elastomer and durometer, the fill material, the plane wave shielding effectiveness, and the continuous use temperature range. The base elastomer is silicone or fluorosilicone, and the filler material is either pure silver or a silver-coated material.

What is QPL 83528?

The Defense Logistics Agency (DLA) maintains a list of products, Qualified Products List (QPL) 83528, that meet MIL-DTL-83528 requirements. This list corresponds to MIL-DTL-83528’s lettered sections and includes suppliers, such as SSP, whose materials are approved for use. A supplier may describe its products as meeting MIL-DTL-83528 requirements, but that doesn’t necessarily mean they are part of QPL 83528.       

It’s also important to remember that MIL-DTL-83528 includes only silicones and fluorosilcones that are filled with pure silver or silver-plated materials. Consequently, conductive elastomers that are filled with nickel-aluminum or nickel-graphite aren’t covered by MIL-DTL-83528 and, therefore, can’t be part of QPL 83528. Depending on your requirements, however, you may be able to use other materials.

QPL 83528 Conductive Shielding Elastomers

SSP makes five QPL 83528 conductive shielding elastomers. The table below provides descriptions along with links to product pages where you can find more information, including data sheets. Note that all of SSP’s EMI elastomers with silver-coated fills are part of QPL 83528, and that the product pages contain links that let you download the Notification of Qualification letters from the DLA.  

Lettered Section

Durometer

Fill Material

Base Elastomer

SSP Product

A

65

Silver-Coated Copper

Silicone

SSP2569

B

65

Silver-Coated Aluminum

Silicone

SSP2368

C

75

Silver-Coated Copper

Fluorosilicone

SSP2573

D

70

Silver-Coated Aluminum

Fluorosilicone

SSP2486

K

85

Silver-Coated Aluminum

Silicone

SSP2571


Conductive Elastomers with Non-Silver Coated Fills

SSP also makes conductive shielding elastomers with non-silver coated fills that are used in some military projects. For example, SSP2529 and SSP2551 are filled with nickel-aluminum and used when excellent corrosion resistance is required, such as in naval and aviation applications where there is exposure to salt spray and fog. SSP2529 uses silicone as the base elastomer and SS2551 uses fluorosilicone.

SSP’s 502 series of conductive shielding elastomers also provide advantages. Because these silicones and flurosilicones are filled with nickel-coated graphite, they aren’t subject to price fluctuations in the previous metals market. SSP’s 502 series products are available in a range of durometers and also come in fabric-reinforced and flame-retardant formulations.   

For more information about materials in this article, contact SSP online or email Dominic Testo, SSP’s Business Development Manager.