SSP-502F-50 is a 50-durometer, nickel-graphite fluorosilicone. Very conductive. EMI shielding. Environmental sealing. Fuel and solvent resistance.


Nickel-Graphite Fluorosilicone for EMI Shielding Gaskets

SSP-502F-50 is a 50-durometer fluorosilicone that’s filled with nickel-coated graphite particles. It’s electrically conductive and combines reliable environmental sealing with superior shielding against electromagnetic interference (EMI) and radio frequency interference (RFI). SSP-502F-50 is dark gray in color, has a thermal stability range of –55° C to 200° C, and provides fuel and solvent resistance. An independent shielding report is available.

EMI RFI Fluorosilicone with Silver-Like Conductivity

SSP-502F-50 is ideal for thinner, lighter-weight solutions and has a typical shielding effectiveness that’s greater than 113 dB at 100 MHz to 10 GHz (E-Field). A full third-party test report is available. The shielding performance levels for SSP-502F-50 are comparable to silver-filled elastomers. Unlike silver-filled elastomers, however, this nickel-graphite fluorosilicone isn’t directly affected by fluctuating silver prices.  

EMI Gasket Fabrication

SSP-502F-50 is supplied in the following form factors:

  • ready-to-mold compound
  • fully-cured, conductive sheet stock
  • extruded profiles
  • continuous rolls

EMI gasket fabrication methods include compression molding and die cutting.     

Comparing EMI Gasket Materials

EMI RFI fluorosilicones from Specialty Silicone Products have low minimum order quantities (MOQs) and short lead times. SSP sends certificates of analysis (COAs) that prove the quality of its materials and can also provide certificates of conformance (COC).  

Compression Deflection

Compression deflection is a measurement of the force required to compress a material to a set amount. Testing for this SSP material  was performed according to ASTM D75 Method A. Download the Compression Deflection Data for a chart with compressive stress [psi] vs. deflection [%].

Learn More about SSP-502F-50

Catalyzed shielding materials are ready for press-cure molding and have a shelf life of six months. Uncatalyzed materials last as long as 1 to 2 years, and cold storage will extend shelf life. Download the PDF data sheet for complete product specifications for SSP-502-F50. There’s also a Safety Data Sheet (SDS) and an independent shielding report available.